Product developed with alkyd resins of high penetration and adhesion. It acts on surfaces of iron and ferrous metals, free of oxide, protecting them from the appearance and fixation of the same, as well as the advance of the corrosion. Its high coverage, excellent leveling and fast drying make possible a hard, matt finish film that jealously protects the treated metals. It offers great receptivity to the subsequent application of finishing enamel, in particular of Chromatic (Synthetic Enamel of Emapi), if it is intended a glossy and impeccable finishing surface.
Container size 1/2 L, 1 L, 4 L and 20 L
White - Red - Gray - Black
This color palette is for guidance only. Colors may vary by surface, lighting and printing technique used. EMAPI reserves the right to modify totally or partially the same without prior notice.
Excessive dilution of the products can modify the behavior of the pigments.
Differences in surface absorption can result in the appearance of grain and change of colors by zones, so it is advisable to always use the bottom indicated for each surface before starting the work.
Introduce square meters of work area*:
* The surface area in m2 is obtained by multiplying the width by the height of the wall (in meters). If you want to paint a room, do the calculation by measuring the four walls, discounting doors and windows..
* Multiply width by length of the surface, plus the surface of the perimeter screeds that must be waterproofed. For sheet metal roofs, add the percentage that consumes the corrugation of the sheet, so that the membrane copies the entire wave of it.
To cover with product
a surface of 50M2
you will need approximately 6rolls painting by hand. product.
In the case of paints, the performance of the product may vary according to the porosity of the surface to be painted and is considered based on the minimum specified by the company.