Solvent based paint with acrylic resins which has maximum resistance to abrasition.
PROPERTIES
This product is formulated from acrylic resins of great penetration and adhesion for the optimal demarcation of pavements, signaling and maintenance of industrial floors. Its easy application and good leveling results in a high thickness film that exhibits excellent resistance to abrasion caused by high traffic and adverse climatic conditions, when applied on substrates exposed to the elements. It is highly receptive to the incorporation of reflective beads. Its rapid drying makes it possible to use the painted sectors in a short time.
CONTAINERS
Container size 4 L and 20 L
COLORS
White - Yellow
This color palette is for guidance only. Colors may vary by surface, lighting and printing technique used. EMAPI reserves the right to modify totally or partially the same without prior notice.
Excessive dilution of the products can modify the behavior of the pigments.
Differences in surface absorption can result in the appearance of grain and change of colors by zones, so it is advisable to always use the bottom indicated for each surface before starting the work.
PaintsWaterproofing
Introduce square meters of work area*:
* The surface area in m2 is obtained by multiplying the width by the height of the wall (in meters). If you want to paint a room, do the calculation by measuring the four walls, discounting doors and windows..
* Multiply width by length of the surface, plus the surface of the perimeter screeds that must be waterproofed. For sheet metal roofs, add the percentage that consumes the corrugation of the sheet, so that the membrane copies the entire wave of it.
PaintsWaterproofing
To cover with product
a surface of 50M2
you will need approximately 6rolls painting by hand. product.
In the case of paints, the performance of the product may vary according to the porosity of the surface to be painted and is considered based on the minimum specified by the company.