with polymers specially designed to withstand demanding traffic
Excellent adherence and elasticity
Easy application and good leveling
Significant thickness of anti-slip film
Product developed from acrylic resins with high penetration and adhesion. Its easy application and good leveling results in a non-slip film of remarkable thickness that exhibits excellent resistance to abrasion caused by the high traffic of people. It allows to achieve an optimum finish that protects the substrate from the adverse climatic conditions, when applied on floors exposed to the elements. It is recommended to use in paddle courts, tennis, gymnasiums and those surfaces subject to periodic friction.
Container size 4 L and 20 L
Green - Gray
This color palette is for guidance only. Colors may vary by surface, lighting and printing technique used. EMAPI reserves the right to modify totally or partially the same without prior notice.
Excessive dilution of the products can modify the behavior of the pigments.
Differences in surface absorption can result in the appearance of grain and change of colors by zones, so it is advisable to always use the bottom indicated for each surface before starting the work.
Introduce square meters of work area*:
* The surface area in m2 is obtained by multiplying the width by the height of the wall (in meters). If you want to paint a room, do the calculation by measuring the four walls, discounting doors and windows..
* Multiply width by length of the surface, plus the surface of the perimeter screeds that must be waterproofed. For sheet metal roofs, add the percentage that consumes the corrugation of the sheet, so that the membrane copies the entire wave of it.
To cover with product
a surface of 50M2
you will need approximately 6rolls painting by hand. product.
In the case of paints, the performance of the product may vary according to the porosity of the surface to be painted and is considered based on the minimum specified by the company.